The EagleTac T20C2 Mark II uses the updated C1200 II light engine for higher output and better circuit efficiency. Mated with the premium CREE XR-G LED, the maximum power output is rated at 4.6W and allows up to 380 lumens of output (300 lumens out the front). The C1200 II engine offers up to 95% circuit efficiency to get the most out of your batteries. The T20C2 offers three output levels activated by twisting the head, plus a strobe mode.

Features:

• Three levels output, activate by twisting bezel
• Tactical strobe mode, operated by pressing rear switch
• Stainless steel bezel
• Syntax ultra-clear glass lens w/ harden and AR coating
• Type III finish / aerospace tough aluminum
• Smooth aluminum reflector
• Gold plates on all contacts
• Superior tactical knurling and griping aerodynamic
• Protrude tactical forward clicky tail-cap
• Included accessories: Holster, Cigar grip ring, Lanyard, Silicon tail boot, Spare o-rings

Output and Runtimes:

Three modes of output, selected by turning the bezel

Cree XP-E Q4 Neutral LED

• Turbo Mode: Constant 190 Lumens (1.7 hrs)
• General Mode: Constant 60 Lumens (13 hrs)
• Low Mode: Constant 5 Lumens (100 hrs)

Cree XP-G R5 Cool LED

• Turbo Mode: Constant 300 Lumens (1.7 hrs)
• General Mode: Constant 60 Lumens (13 hrs)
• Low Mode: Constant 5 Lumens (180 hrs)

Operation:

Select brightness by turing the bezel. Tighten the head for Turbo mode. Loose the head for General mode. Tighten and loose the head (or doing the opposite) for Low mode. Activate strobe by double pressing the switch (strobe can only be activated when the light is at Turbo or General mode).